ABB ACSM1 Series, Firmware Manual

Page: 95 / 334

Parameters and firmware blocks
95
(512) SET3 PAR ACT User parameter set 3 has been loaded using parameter 16.09 .
(1024) SET4 PAR ACT User parameter set 4 has been loaded using parameter 16.09 .
16.11 USER IO SET LO FW block: None
Together with parameter 16.12 USER IO SET HI , selects the user parameter set when parameter
16.09 USER SET SEL is set to (10) IO MODE . The status of the source defined by this parameter and
parameter 16.12 select the user parameter set as follows:
Bit pointer: Group, index and bit
16.12 USER IO SET HI FW block: None
See parameter 16.11 USER IO SET LO .
Bit pointer: Group, index and bit
16.13 TIME SOURCE PRIO FW block: None
Selects which real-time clock source is adopted by the drive as the master real-time clock. Some
selections specify multiple sources that are in order of priority.
(0) FB_D2D_MMI Fieldbus (highest priority); drive-to-drive link; man-machine interface
(control panel or PC).
(1) D2D_FB_MMI Drive-to-drive link (highest priority); fieldbus; man-machine interface
(control panel or PC).
(2) FB_D2D Fieldbus (highest priority); drive-to-drive link.
(3) D2D_FB Drive-to-drive link (highest priority); fieldbus.
(4) FB ONLY Fieldbus only.
(5) D2D ONLY Drive-to-drive link only.
(6) MMI_FB_D2D Man-machine interface (control panel or PC) (highest priority);
fieldbus; drive-to-drive link.
(7) MMI ONLY Man-machine interface (control panel or PC) only.
(8) INTERNAL No external sources are used as master real-time clock.
Status of source
defined by par. 16.11
Status of source
defined by par. 16.12
User parameter set
selected
FALSE FALSE Set 1
TRUE FALSE Set 2
FALSE TRUE Set 3
TRUE TRUE Set 4