![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539092.webp)
92 Program features
By default, the set of parameters included in the calculation contain most parameters
with the exception of
• actual signals
• parameter group
• parameters that are activated to validate new settings (such as
and
• parameters that are not saved to the flash memory (such as
…
)
• parameters that are internally calculated from others (such as
…
• dynamic parameters (eg. parameters that vary according to hardware), and
• application program parameters.
The default set can be edited using the Drive customizer PC tool.
Settings
(page
).
User lock
For improved cybersecurity, it is highly recommended that you set a master pass
code to prevent, for example, the changing of parameter values and/or the loading of
firmware and other files.
WARNING!
ABB will not be liable for damages or losses caused by the failure
to activate the user lock using a new pass code. See
(page
To activate the user lock for the first time,
• Enter the default pass code, 10000000, into
. This will make
parameters
…
visible.
. Always use eight
digits; if using Drive composer, finish with Enter.
• Confirm the new pass code in
.
WARNING!
Store the pass code in a safe place – the user lock cannot be
opened even by ABB if the pass code is lost.
• In
, define the actions that you want to prevent (we
recommend you select all the actions unless otherwise required by the
application).
• Enter an invalid (random) pass code into
• Activate
, or cycle the power to the control unit.
…
are hidden. If they are not, enter another
Summary of Contents for ACS880-x04
