Parameters 169
(Visible when
=
)
Displays the delayed status of the digital input/outputs on the
extension module. This word is updated only after
activation/deactivation delays (if any are specified).
Bit 0 indicates the status of DIO1.
Note:
The number of active bits in this parameter depends on
the number of digital input/outputs on the extension module.
Example:
1001b = DIO1 and DIO4 are on, remainder are off.
This parameter is read-only.
-
0000b…1111b
Delayed status of digital input/outputs.
1 = 1
(Visible when
=
Defines a filtering time for parameters
and
10.0 ms
0.8 … 100.0 ms
Filtering time for DI status parameters.
10 = 1 ms
(Visible when
=
)
Defines a filtering time for parameters
. The filtering time will only affect the
DIOs that are in input mode.
10.0 ms
0.8 … 100.0 ms
Filtering time for DIO status parameters.
10 = 1 ms
(Visible when
=
)
Selects whether DIO1 of the extension module is used as a
digital input or output.
Output
DIO1 is used as a digital output.
0
Input
DIO1 is used as a digital input.
1
(Visible when
=
)
Selects a drive signal to be connected to digital input/output
DIO1 of the extension module when parameter
Not energized
Output is not energized.
0
Energized
Output is energized.
1
Ready run
(see page
2
Enabled
(see page
4
Started
(see page
5
Magnetized
(see page
6
Running
(see page
7
Ready ref
(see page
8
At setpoint
(see page
9
Reverse
).
10
Zero speed
).
11
Above limit
Bit 10 of
(see page
12
Warning
(see page
13
Fault
(see page
14
Fault (-1)
(see page
15
Start request
Bit 13 of
(see page
16
Open brake
command
(see page
22
Ext2 active
Bit 11 of
(see page
23
No.
Name/Value
Description
Def
/
FbEq16
Summary of Contents for ACS880-x04
