ABB ACS880 Series, Firmware Manual

Page: 404 / 764

Def / Type
FbEq 16b / 32b Description Name / Range /
Selection No.
14 As selection 1 x Pt1000 analog I/O , but with two sensors
connected in series. Using multiple sensors improves
measurement accuracy significantly.
2 x Pt1000 analog
I/O
15 As selection 1 x Pt1000 analog I/O , but with three
sensors connected in series. Using multiple sensors
improves measurement accuracy significantly.
3 x Pt1000 analog
I/O
16 Pt1000 sensor connected to encoder interface 1. See
parameters
91.21 Module 1 temp sensor type and 91.22
Module 1 temp filter time .
Note: Pt1000 sensor is supported with FEN-11 and
FEN-31 encoder modules only.
Pt1000 encoder
module 1
17 Pt1000 sensor connected to encoder interface 2. See
parameters
91.24 Module 2 temp sensor type and 91.25
Module 2 temp filter time .
Note: Pt1000 sensor is supported with FEN-11 and
FEN-31 encoder modules only.
Pt1000 encoder
module 2
130 ° / real32 Defines the fault limit for temperature monitoring
function 2.
When measured temperature 2 exceeds the limit, the
drive trips on fault
4982 External temperature 2 .
The unit is selected by parameter 96.16 Unit selection .
Note: With °F, the range is -76…1832. With a PTC sensor,
the range is 0…5000 ohms.
Temperature 2 fault
limit 35.22
1 = 1 ° / 1 = 1 ° Fault limit for temperature monitoring function 2. -60...1000 °
110 ° / real32 Defines the warning limit for temperature monitoring
function 2. When measured temperature 2 exceeds the
limit, a warning
(
A492 External temperature 2 ) is generated.
The unit is selected by parameter 96.16 Unit selection .
Note: With °F, the range is -76…1832. With a PTC sensor,
the range is 0…5000 ohms.
Temperature 2
warning limit 35.23
1 = 1 ° / 1 = 1 ° Warning limit for temperature monitoring function 2. -60...1000 °
Not selected / uint32 Selects the input for parameter 35.21 Temperature 2
source , selections KTY84 analog I/O , 1 x Pt100 analog
I/O , 2 x Pt100 analog I/O , 3 x Pt100 analog I/O and
Direct temperature .
Temperature 2 AI
source 35.24
0 None. Not selected
1 Analog input AI1 on the control unit. AI1 actual value
2 Analog input AI2 on the control unit. AI2 actual value
See Terms and abbreviations (page 169) . Other [value]
0 °C / real32 Defines the calibration of temperature 2.
See parameter
35.17 Temperature 1 calibration .
Temperature 2
calibration 35.27
1 = 1 °C / 1 = 1 °C Calibration of temperature 2 in celsius. -30...1000 °C
404 Parameters