ABB ACS880 Series, Firmware Manual

Page: 244 / 764

Def / Type
FbEq 16b / 32b Description Name / Range /
Selection No.
1 = Maximum limit supervision of AI2 active. AI2 > MAX b3
Reserved b4…15
1 = 1 0000h…FFFFh
- / uint16 (Visible when 14.1 Module 1 type = FIO-11 )
Specifies the analog input limits to be supervised. See
parameter
14.19 AI supervision function .
AI supervision
selection 14.20
1 = Minimum limit supervision of AI1 active. AI1 < MIN b0
1 = Maximum limit supervision of AI1 active. AI1 > MAX b1
1 = Minimum limit supervision of AI2 active. AI2 < MIN b2
1 = Maximum limit supervision of AI2 active. AI2 > MAX b3
1 = Minimum limit supervision of AI3 active. AI3 < MIN b4
1 = Maximum limit supervision of AI3 active. AI3 > MAX b5
Reserved b6…15
1 = 1 0000h…FFFFh
No action / uint16 (Visible when 14.1 Module 1 type = FAIO-01 )
Triggers the analog input tuning function, which
enables the use of actual measurements as the
minimum and maximum input values instead of
potentially inaccurate estimates.
Apply the minimum or maximum signal to the input
and select the appropriate tuning function.
See also the drawing at parameter
14.35 AI1 scaled at
AI1 min .
AI tune 14.21
0 Tuning action completed or no action has been
requested.
The parameter automatically reverts to this value after
any tuning action. No action
1 The measured value of AI1 is set as the minimum value
of AI1 into parameter
14.33 AI1 min .
AI1 min tune
2 The measured value of AI1 is set as the maximum value
of AI1 into parameter
14.34 AI1 max .
AI1 max tune
3 The measured value of AI2 is set as the minimum value
of AI2 into parameter
14.48 AI2 min .
AI2 min tune
4 The measured value of AI2 is set as the maximum value
of AI2 into parameter
14.49 AI2 max .
AI2 max tune
No action / uint16 (Visible when 14.1 Module 1 type = FIO-11 )
Triggers the analog input tuning function, which
enables the use of actual measurements as the
minimum and maximum input values instead of
potentially inaccurate estimates.
Apply the minimum or maximum signal to the input
and select the appropriate tuning function.
See also the drawing at parameter
14.35 AI1 scaled at
AI1 min .
AI tune 14.21
244 Parameters