ABB ACS880 N5700 Series, Firmware Manual, Page: 454 / 662

Def / Type
FbEq 16b / 32b Description Name / Range /
Selection No.
1 = Jog in reverse direction
0 = Stop jogging in reverse direction Jog reverse b3
1 = Preset position Set position b4
1 = Initiate homing Homing b5
1 = Initiate velocity movement Velocity b6
1 = Initiate relative positioning movement Relative b7
1 = Initiate absolute positioning movement Absolute b8
1 = Initiate position index Position index b9
00 = Shortest
10 = Forward
01 = Reverse
11 = Shortest Patch direction bit 0 b10
00 = Shortest
10 = Forward
01 = Reverse
11 = Shortest Patch direction bit 1 b11
1 = Provide gear-in (synchronization with master axis)
function Gear In b12
1 = Initiate stop function Stop b13
1 = Initiate halt function Halt b14
1 = Enable watchdog supervision Watchdog b15
1 = 1 0000h…FFFFh
- / uint16 Local position control word 2. Local position
control word 2 75.62
1 = Initiate additive positioning movement Additive b0
1 = Initiate superimposed movement Superimposed b1
Reserved b2
1 = Initiate phasing relative movement Phasing relative b3
Reserved b4
1 = Initiate position latching routine 1 Latch 1 b5
1 = Initiate position latching routine 2 Latch 2 b6
1 = Start virtual master with defined velocity
0 = Stop virtual master Virtual master run b7
1 = Jog virtual master in forward direction
0 = Stop jogging in forward direction Virtual master jog
forward b8
1 = Jog virtual master in reverse direction
0 = Stop jogging in reverse direction Virtual master jog
reverse b9
1 = Initiate stop routine for virtual master axis Virtual master stop b10
1 = Activate user bit 11 User bit 1 b11
1 = Activate user bit 12 User bit 2 b12
1 = Activate user bit 13 User bit 3 b13
454 Parameters