ABB ACS880 N5700 Series, Firmware Manual, Page: 16 / 662

Information Version Parameter
APCAL (Position control lib-
rary) version 1.2.0.0 7.28 Position control library
version
Note: Not visible at the mo-
ment, but can be seen in
Drive composer PC tool (Ap-
plication - More - System
info).
Licensing
The Position control program comes with license keys on the ZMU memory unit.
The program activates only after recognizing the key, and correspondingly registers
itself with the position control program.
See below for the needed licenses included with the +N5700 option code. With
+N5700, the licenses are not included in the product order code (type code).
License key Device
Memory unit (ZMU) license key for IEC pro-
gramming N8010 MU License for Appl Prog
Memory unit (ZMU) license key for APCFx N8049 MU Interlock key – Position
You can see the license information in the Drive composer PC tool or on the
ACS-AP-x control panel in
System info → Licenses.
The control program (APCLx) can be downloaded to the memory unit (ZCU) with
the needed licenses. If the program was downloaded to the memory unit without
the license key, then the drive indicates a fault (
64A5 Licensing fault ). See the
auxiliary fault code in the Event logger to know the plus code of the missing license,
in this case N8015. For further assistance, contact your local ABB representative.
Safety instructions
Follow all safety instructions delivered with the drive.
16 Introduction to the manual