ABB ACS880-M04, Hardware Manual

Page: 112 / 195

112 Technical data

Nominal ratings with 500 V AC supply

Definitions
Drive type
ACS880-M04 Frame
size Input
ratings Output ratings
Nominal
No-overload
use Light-
overload use Heavy-
duty use
I
1N
*I
1N
I
2N
I
Max
P
N
I
Ld
P
Ld
I
Hd
P
Hd
A A A A kW A kW A kW
-03A0-5 R1 2.3 3.8 3.0 4.4 1.5 2.8 1.1 2.5 1.1
-03A6-5 R1 3.1 5.6 3.6 5.3 1.5 3.4 1.5 3.0 1.5
-04A8-5 R1 4.0 6.8 4.8 7.0 2.2 4.5 2.2 4.0 2.2
-06A0-5 R1 5.5 9.4 6.0 8.8 3.0 5.5 3.0 5.0 2.2
-08A0-5 R1 6.6 11.2 8.0 10.5 4.0 7.6 4.0 6.0 3.0
-010A-5 R2 8.7 13 10.5 13.5 5.5 9.7 5.5 9.0 4.0
-014A-5 R2 12 18 14 16.5 7.5 13.0 7.5 11.0 5.5
-018A-5 R2 16 23 18 21 11.0 16.8 7.5 14.0 7.5
-025A-5 R3 20 – 25 33 15.0 23 11.0 19.0 11.0
-030A-5 R3 26 – 30 36 18.5 28 15.0 24 15.0
-035A-5 R3 30 – 35 44 22 32 18.5 29 18.5
-044A-5 R3 36 – 44 53 30 41 22 35 22
-050A-5 R3 42 – 50 66 30 46 30 44 30
-061A-5 R4 55 – 61 78 37 57 37 52 30
-078A-5 R4 65 – 78 104 45 74 45 66 45
-094A-5 R4 82 – 94 124 55 90 55 75 45
3AXD10000434191
See symbol definitions below.
I
1N
Nominal input current (rms) at 40 °C (104 °F).
*Without mains choke.
I
2N
Nominal output current.
I
Max
Maximum output current. Available for at least 10 seconds at start, otherwise as long
as allowed by drive temperature.
P
N
Typical motor power for no-overload use.
I
Ld
Continuous rms output current. 10% overload is allowed for 1 minute every 5 minutes.
P
Ld
Typical motor power for light-overload use.
I
Hd
Continuous rms output current. 50% overload is allowed for 1 minute every 5 minutes.
P
Hd
Typical motor power for heavy-duty use.
Note: To achieve the rated motor power given in the table, the rated current of the drive must
be higher than or equal to the rated motor current.
The DriveSize dimensioning tool available from ABB is recommended for selecting the drive,
motor and gear combination.
The maximum allowed motor shaft power is limited to 1.5 ·
P
Hd
, 1.1 · P
N
or P
cont.max
(whichever value is the greatest). If the limit is exceeded, motor torque and current are
automatically restricted. The function protects the input bridge of the drive against overload.