![background image](http://html.mh-extra.com/html/abb/acs880-87cc/acs880-87cc_hardware-manual_4547091.webp)
Maintenance 91
Replacing the upper cooling fan of the LCL filter cubicle
WARNING!
Only qualified electricians are allowed to do this work. Read the
complete safety instructions of the converter. If you ignore the instructions,
physical injury, death, or damage to the equipment can occur.
1. Disconnect the converter from the all power sources and make sure it is safe to start
the work. See the safety instructions.
2. Open the door of the LCL filter cubicle. The upper cooling fans of the LCL filter cubicle
are attached to the metal plate.
3. Disconnect the wiring plug of the fan (a).
4. Undo the fastening screws of the fan (b).
5. Pull the fan out.
6. Install a new fan in reverse order. Check that the air flow direction is correct (an arrow
indicating the direction is marked on the side of the fan). In this case, the air flow
direction is towards the inner part of the cabinet.
Summary of Contents for ACS880-87CC
