ABB ACS880-207, Hardware Manual, Page: 44 / 148

￭
Type designation key of the filter module
Type designation describes the composition of the filter in short. The type designation is
visible on the label (sticker) which is attached to the filter module. The complete designation
code is divided in subcodes:
• The first 1…16 digits form the basic code. It describes the basic construction of the filter.
The fields in the basic code are separated with hyphens.
• The plus codes follow the basic code. Each plus code starts with an identifying letter
(common for the whole product series), followed by descriptive digits. The plus codes
are separated by plus signs.
The following table lists the basic code and plus codes of the filter.
DESCRIPTION CODE
Basic codes
Product series ACS880
LCL filter for frame R8i supply module. The delivery includes on/off-controlled cooling fan as
standard BLCL
Size
See the technical data. 13, 15,
24, 25
Voltage range
Voltage rating: 380…500 V. This is indicated in type designation label as typical input voltage levels
(3~ 400/480/500 V AC). 5
Voltage rating: 525…690 V. This is indicated in type designation label as typical input voltage levels
(3~ 525/600/690 V AC). 7
Plus codes
Internal heating element (included in the delivery as standard) C183
Direct-on-line cooling fan (included in the delivery as standard with 230 V supply for BLCL-1x-x /
400 V AC supply for BLCL-2x-x) C188
BLCL-1x-x only: 115 V AC 1-phase fan supply G304
BLCL-2x-x only: 208 V AC 3-phase fan supply G427
Module to be installed in the ABB cabinet (included in the delivery as standard) P922
Hardware version. LCL filter modules with or without this code are interchangeable. V991
44 Operation principle and hardware description