ABB ACS880-207, Hardware Manual

Page: 41 / 148

DESCRIPTION CODE
A-meter in three phases 3G335
Arc monitoring unit, 1 loop, Rea 101, including cable G336
Arc monitoring with current monitoring unit G337
Corrosion classification coupon in ACU (Purafil 3AUA64044052) G343
Auxiliary voltage transformer G344
Arc monitoring unit, extension for 2 loops, Rea 105, including cable G426
Voltage measurement with BAMU auxiliary measurement unit. Weak supply networks: In weaker
supply networks with a short-circuit ratio less than 8, it is highly recommended to install a BAMU
auxiliary measurement unit to the drive. In such networks, there is a risk of nuisance DC overvoltage
tripping due to disturbances caused by probable high-voltage THD in the supply voltage. Short-
circuit ratio is defined as the supply network's apparent short-circuit power
S
k,net
divided by the
drive's nominal apparent power S
n
( S
k,net
/ S
n
< 8).
G442
Common mode filter temperature monitoring G453
Cabling
Power cabling through roof of cabinet H351
Blind 3 mm steel cable gland plates H358
Blind 3 mm aluminium cable gland plates H364
Blind 6 mm brass cable gland plates H365
Control cabling through roof of cabinet H368
Control panel and PC options
Control panel ACS-AP-W (max. 4 panels on the door) J400
LED monitoring display J401
Drive control panel connection kit J410
Remote supply ON/OFF control (from upper controller) J411
Common control panel for a line up J412
ACS-AP-I control panel J425
Fieldbus adapter modules
Panel Bus, built with Ethernet cable, needs FDPI option board in each unit, max. 32 K450
FDNA-01 DeviceNet adapter module K451
FPBA-01 PROFIBUS DP adapter module K454
FCAN-01 CANopen adapter module K457
FSCA-01 Modbus RTU adapter module K458
FCNA-01 ControlNet adapter module K462
FECA-01 EtherCAT adapter module K469
FEPL-02 Ethernet POWERLINK adapter module K470
FENA-11 EtherNet/IP, Modbus TCP and PROFINET adapter module K473
Operation principle and hardware description 41