ABB ACS880-207, Hardware Manual

Page: 10 / 148

Categorization by frame size and option code
The instructions and technical data which concern only certain unit or frame sizes are marked
with the size identifier.
The unit size can be identified from the basic code visible on the type designation label, for
example, ACS880-207-0420A-3 where 0420A is the unit size. The option codes of the unit
are listed after the plus sign. Section
Type designation keys (page 39) explains the type
designation code in detail.
The frame size of the IGBT supply module is, for example, R8i. The ratings table lists the
frame sizes.
Use of component designations
Some device names in the manual include the item designation in brackets, for example
[Q20], to make it possible to identify the components in the circuit diagrams of the drive.
Terms and abbreviations
Description Term
Auxiliary control unit. Contains control electronics, auxiliary voltage circuitry, etc. ACU
Type of control board BCON
Type of control unit BCU
Circuit board in which the control program runs Control board
Control board built in a housing (often rail-mountable) Control unit
One section of a cabinet-installed drive. A cubicle is typically behind a door of its own. Cubicle
Varistor board CVAR
DC circuit between rectifier and inverter DC link
Digital input DI
Frequency converter for controlling AC motors Drive
Optional CANopen® adapter module FCAN
Optional ControlNet™ adapter module FCNA-01
DDCS communication module with two pairs of 10 Mbit/s DDCS channels FDCO-01
Optional DeviceNet™ adapter module FDNA-01
Diagnostics and panel interface board FDPI
Optional I/O extension adapter FEA-03
Optional EtherCAT® adapter module FECA-01
Optional Ethernet adapter module for EtherNet/IP™, Modbus TCP® and PROFINET
IO® protocols FENA-11
Optional Ethernet adapter module for EtherNet/IP™, Modbus TCP® and PROFINET
IO® protocols, 2-port FENA-21
Optional Ethernet POWERLINK adapter module FEPL-01
Optional digital I/O extension module FIO-01
Optional analog I/O extension module FIO-11
Optional PROFIBUS DP® adapter module FPBA-01
Physical size of the drive or power module Frame, frame size
Optional RS-485 (Modbus/RTU) adapter FSCA-01
Optional functional safety modules FSO-12, FSO-21
Incoming unit ICU
Insulated gate bipolar transistor IGBT
IGBT bridge and related components enclosed inside a metal frame or enclosure.
Intended for cabinet installation. IGBT supply module
10 Introduction to the manual