ABB ACS880-1607LC, Hardware Manual

Page: 63 / 106

Start-up
Contents of this chapter
The underlined tasks are needed for certain cases only. The default device designations (if
any) are given in square brackets, for example, DC switch/disconnector [Q11]. The same
device designations are also used in the delivery-specific circuit diagrams.
Note:
Always refer to the delivery-specific circuit diagrams when proceeding with the start-up.
WARNING!
Only qualified by ABB electricians/engineers are allowed to do the work described
in this chapter. In addition, the electrician/engineer must know the energy storage
system he is about to take into use, and the DC/DC converter control program and
operation principle. Obey all the safety instructions in
Safety instructions for ACS880
multidrive cabinets and modules (3AUA0000102301 [English]) and Electrical safety
precautions (page 39) . If you ignore the safety instructions, injury or death, or
damage to the equipment can occur.
Before you start, connect a control panel to the DC/DC converter unit. We recommend that
you also have a PC with a drive commissioning tool (Drive composer) connected.
8
Start-up 63
12