ABB ACS880-1604LC, Hardware Manual

Page: 32 / 200

Type designation key
￭ Type designation key of the module
Type designation describes the composition of the module in short. The complete designation
code is divided in subcodes:
• The first digits form the basic code. It describes the basic construction of the module.
The fields in the basic code are separated by hyphens.
• The plus codes follow the basic code. Each plus code starts with an identifying letter
(common for the whole product series), followed by descriptive digits. The plus codes
are separated by plus signs.
The subcodes are described below.
DESCRIPTION CODE
Basic codes
Product series ACS880
Construction: Liquid-cooled inverter, supply, converter or brake module. 104LC
Size
Refer to the ratings table in the technical data. xxxxx
Voltage range
DC voltage corresponding AC input voltages 3 〜 525…690 V. This is indicated in the type
designation label as typical input voltage level 742 / 849 / 976 V DC.
7
Option codes (plus codes)
Internal d u /d t filtering. Standard with 690 V modules. E205
￭ Type designation key of the filter module
The designation code of the BDCL filter is divided in subcodes:
• The first 4 letters and two numbers give the type of the filter, for example, BDCL-15LC -7.
• The plus codes follow the basic code. Each plus code starts with an identifying letter
(common for the whole product series), followed by descriptive digits. The plus codes
are separated by plus signs.
DESCRIPTION CODE
Basic codes
Liquid-cooled BDCL filter BDCL-15LC
Voltage range
DC voltage corresponding AC input voltages 3 〜 525…690 V. This is indicated in the type
designation label as typical input voltage level 742 / 849 / 976 V DC.
7
32 Operation principle and hardware description