ABB ACS880-14, Hardware Manual

Page: 25 / 248

Introduction to the manual
Contents of this chapter
This chapter describes the intended audience and contents of the manual. It contains a
flowchart of steps in examining the delivery, installing and commissioning the drive. The
flowchart refers to chapters/sections in this manual and other manuals.
Applicability
This manual applies to ACS880-14 drive modules intended for user-defined cabinet
installations.
Target audience
This manual is intended for people who plan the installation, install, start up and do
maintenance work on the drive, or create instructions for the end user of the drive concerning
the installation and maintenance of the drive.
Read the manual before working on the drive. You are expected to know the fundamentals
of electricity, wiring, electrical components and electrical schematic symbols.
Purpose of the manual
This manual provides information needed for planning the installation, installing, and servicing
the drive.
Categorization by frame size and option code
The instructions, technical data and dimension drawings which concern only certain drive
frame sizes are marked with the symbol of the frame size (R11). The frame size is marked
on the type designation label.
2
Introduction to the manual 25