ABB ACS880-04FXT, Hardware Manual

Page: 56 / 196

￭ Package drawings
7
4
3
1
2
B1
B2
8
3AXD50000040437_assy
12
6
5
9
14
13
10
11
11
A1
A2
B3
Standard drive module package A1
Package with IP20 shrouds for cabling area (option) A2
Drive module with factory installed options (for example, +E208), delivery documents, multilingual residual
voltage warning sticker, printed multilingual start-up quick guide. Other printed manuals with R700. 1
Cardboard lids 2
Top box (with option "IP20 shrouds for cabling area"). See below for the box B1 contents. 3
Outer sheathing 4
Inner sheathing 5
Accessories box: screw package, spacers for FSO module installation, rubber grommets for control unit
cable entry holes in the middle front cover of the drive module. 6
Accessory sleeve containing: 7
• external control unit
• output cable connection terminal box (B2, see below for the box contents)
• input cable connection terminal box (B3, see below for the box contents)
• control panel door mounting kit
If all options do not fit in the accessory sleeve, the rest are packed in this space on the drive module 8
Cardboard support tray 9
Cardboard support 10
Cardboard lid 11
Wall mounting brackets with screws for attaching the drive module heatsink by the top and bottom to a
mounting plate or wall (option). The brackets bring a gap for cooling air flow and prevent the drive module
screws from chafing the plate. See section
Attaching the drive module by the heatsink (page 60) .
12
Hood 13
Pallet 14
56 Mechanical installation
4