ABB ACS880-04F, Hardware Manual, Page: 139 / 172

Technical data 139
•
For installation in Canada, branch circuit protection must be provided in accordance
with the Canadian Electrical Code and any applicable provincial codes. To fulfill this
requirement, use the UL classified fuses.
•
The drive module provides overload protection in accordance with the National
Electrical Code (NEC).
CSA marking
CSA marking is pending for the drive modules.
EAC (Eurasian Conformity) marking
The drive has EAC certification. EAC marking is required in Russia, Belarus and
Kazakhstan.
EIP (Electronic Information Products) marking
An EIP mark is attached to the drive to verify that the drive complies with the
regulations of the Chinese Administrative Measure on the Control of Pollution Caused by
Electronic Information Products.
Disclaimers

Cybersecurity disclaimer
This product is designed to be connected to and to communicate information and data via
a network interface. It is Customer's sole responsibility to provide and continuously ensure
a secure connection between the product and Customer network or any other network (as
the case may be). Customer shall establish and maintain any appropriate measures (such
as but not limited to the installation of firewalls, application of authentication measures,
encryption of data, installation of anti-virus programs, etc) to protect the product, the
network, its system and the interface against any kind of security breaches, unauthorized
access, interference, intrusion, leakage and/or theft of data or information. ABB and its
affiliates are not liable for damages and/or losses related to such security breaches, any
unauthorized access, interference, intrusion, leakage and/or theft of data or information.

Disclaimer
The manufacturer shall have no obligation with respect to any product which (i) has been
improperly repaired or altered; (ii) has been subjected to misuse, negligence or accident;
(iii) has been used in a manner contrary to the manufacturer's instructions; or (iv) has
failed as a result of ordinary wear and tear.