ABB ACS880-04F-504A-3, Hardware Manual

Page: 47 / 202

￭
Package drawings
7
4
3
1
2
B1
B2
8
3AXD50000040437_assy
12
6
5
9
14
13
10
11
11
A1
A2
B3
Package with no IP20 shrouds for cabling area (option 0B051) A1
Standard drive module package A2
Drive module with factory installed options, delivery documents, multilingual residual voltage
warning sticker, printed multilingual installation and start-up guides. Other printed manuals with
R700. 1
Cardboard lids 2
Top box (with standard drive module configuration). Contains IP20 shrouds for cabling area. See
below for the box B1 contents. 3
Outer sheathing 4
Inner sheathing 5
Accessories box: screw package, spacers for FSO module installation, rubber grommets for control
unit cable entry holes in the middle front cover of the drive module. 6
Accessory sleeve containing: 7
• external control unit
• output cable connection terminal box (B2, see below for the box contents)
• input cable connection terminal box (H370, B3, see below for the box contents)
• control panel door mounting kit
If all options do not fit in the accessory sleeve, the rest are packed in this space on the drive module 8
Cardboard support tray 9
Cardboard support 10
Cardboard lid 11
Wall mounting brackets with screws for attaching the drive module heatsink by the top and bottom
to a mounting plate or wall (C217). The brackets bring a gap for cooling air flow and prevent
the drive module screws from chafing the plate. See section
Attaching the drive module by the
heatsink (page 52) .
12
Hood 13
Pallet 14
Mechanical installation 47
10