ABB ACS880-04F-504A-3, Hardware Manual

Page: 153 / 202

CSA certification mark for USA and Canada
Product has been tested and evaluated against the relevant North American standards by
the CSA Group. Valid with rated voltages up to 600 V.
EAC (Eurasian Conformity) mark
Product complies with the technical regulations of the Eurasian Customs Union. EAC mark
is required in Russia, Belarus and Kazakhstan.
Electronic Information Products (EIP) symbol including an Environment Friendly Use Period
(EFUP).
Product is compliant with the People’s Republic of China Electronic Industry Standard (SJ/T
11364-2014) about hazardous substances. The EFUP is 20 years. China RoHS II Declaration of
Conformity is available from
https://library.abb.com .
RCM mark
Product complies with Australian and New Zealand requirements specific to EMC, telecom-
munications and electrical safety. For fulfilling the EMC requirements, see the additional in-
formation concerning the drive EMC compliance (IEC/EN 61800-3).
WEEE mark
At the end of life the product should enter the recycling system at an appropriate collection
point and not placed in the normal waste stream.
UKCA (UK Conformity Assessed) mark
Product complies with the applicable United Kingdom’s legislation (Statutory Instruments).
Marking is required for products being placed on the market in Great Britain (England, Wales
and Scotland).
EMC compliance (IEC/EN 61800-3)
￭
Definitions
EMC stands for Electromagnetic Compatibility. It is the ability of electrical/electronic
equipment to operate without problems within an electromagnetic environment.
Likewise, the equipment must not disturb or interfere with any other product or system
within its locality.
First environment includes establishments connected to a low-voltage network which
supplies buildings used for domestic purposes.
Second environment includes establishments connected to a network not supplying
domestic premises.
Drive of category C1: drive of rated voltage less than 1000 V and intended for use in
the first environment.
Drive of category C2: drive of rated voltage less than 1000 V and intended to be installed
and started up only by a professional when used in the first environment.
Technical data 153