ABB ACS880-04F-504A-3, Hardware Manual

Page: 152 / 202

need selective treatment according to IEC 62635 guidelines. To aid recycling, plastic
parts are marked with an appropriate identification code.
Contact your local ABB distributor for further information on environmental aspects
and recycling instructions for professional recyclers. End of life treatment must follow
international and local regulations.
Applicable standards
The drive complies with the following standards.
Adjustable speed electrical power drive systems. Part 5-1: Safety requirements
– electrical, thermal and energy IEC/EN 61800-5-1:2007
Safety of machinery. Electrical equipment of machines. Part 1: General require-
ments. EN 60204-1:2006
+A1:2010
Provisions for compliance: The final assembler of the machine is responsible
for installing
• emergency-stop device
• supply disconnecting device
• IP00 drive module into a cabinet.
Degrees of protection provided by enclosures (IP code) IEC 60529:1989 + A1:1999
+ A2:2013
EN 60529:1991 + A1:2000
+ A2:2013
Adjustable speed electrical power drive systems. Part 3: EMC requirements
and specific test methods IEC 61800-3:2004 +
A1:2011
EN 61800-3:2004 +
A1:2012
Standard for Adjustable Speed Electrical Power Drive Systems – Part 5-1:
Safety Requirements – Electrical, Thermal and Energy UL 61800-5-1 First edi-
tion
General Requirements - Canadian Electrical Code, Part II CSA C22.2 No. 0-10
Adjustable speed drives CSA C22.2 No. 274-17
Markings
These markings are attached to the drive:
CE mark
Product complies with the applicable European Union legislation. For fulfilling the EMC re-
quirements, see the additional information concerning the drive EMC compliance
(IEC/EN 61800-3).
UL Listed mark for USA and Canada
Product has been tested and evaluated against the relevant North American standards by
the Underwriters Laboratories. Valid with rated voltages up to 600 V.
TÜV Safety Approved mark (functional safety)
Product contains Safe torque off and possibly other (optional) safety functions which are
certified by TÜV according to the relevant functional safety standards. Applicable to drives
and inverters; not applicable to supply, brake or DC/DC converter units or modules.
152 Technical data