ABB ACS850-04 series, Hardware Manual

Page: 35 / 164

Operation principle and hardware description
35
Type designation key
The type designation contains information on the specifications and configuration of
the drive module. The first digits from left express the basic configuration. The
optional selections are given thereafter, separated by plus signs, eg, +E208. The
main selections are described below. Not all selections are available for all types.
For more information, refer to
ACS850-04 Ordering Information
(3AXD00000579470), available on request.
Code Description
Basic code, eg, ACS850-04-710A-5
Product series
ACS850 ACS850 product series
Type
04 Air-cooled drive module. When no options are selected: IP00 (UL type open), top entry and
bottom exit for cables (terminals at the side of the module), external JCU control unit with a
front cover but no control panel, Standard Control Program, AC choke, coated boards, Safe
torque off function, pedestal guide plate, extraction and insertion ramp, module fastening
bracket and screws, hardware manual, multilingual quick start-up guide and CD containing
all manuals.
Size
xxxA Refer to the rating tables, page 125 .
Voltage range
5 380…500 V AC
Option codes (plus codes)
Resistor braking
D150 Brake chopper and brake resistor connection busbars, and R+ and R- terminals in the power
cabling panel (+H381 or +H383) if the power cabling panels are ordered
Filters
E208 Common mode filter. Includes three extension busbars to the drive module output busbars
with units without H381 or +H383.
Cabling panels
H381 Power cabling panels (U1, V1, W1, U2, V2, W2 terminals) to be installed in the cabinet,
rubber grommet that gives the unit an IP20 protection class.
H383 Power cabling panels (U1, V1, W1, U2, V2, W2 terminals) to be installed in the cabinet,
degree of protection: IP00.
DC busbars
H356 DC output busbars, and DC+ and DC- terminals in the power cabling panel (+H381 or
+H383) if the power cabling panels are ordered
Pedestal
0H354 No pedestal
Control panel and control unit
J400 Control panel inserted onto the JCU control unit. Includes control panel mounting platform
and internal cable.
J410 Control panel with a door mounting kit. Includes control panel mounting platform, IP54 cover
and a 3-meter panel connection cable.
J414 Control panel holder with cover and internal cable but no control panel. Not to be used with
+J400.
0C168 Without front cover for the JCU control unit
P905 JCU control unit inside the circuit board compartment of drive module.