ABB ACS580-04, Hardware Manual

Page: 173 / 298

1
2
1
2
9. Install the new module in reverse order to the above.
Replacing the drive module with H381
WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or
death, or damage to the equipment can occur.
Note: The replacement module must be of the same type as the original module: same
type code and same option codes.
Handle the drive module carefully:
• Use safety shoes with a metal toe cap to prevent foot injury.
• Lift the drive module only by the lifting lugs.
• Make sure that the module does not topple over when you move it on the floor:
To open the support legs, press each leg a little down and turn it aside (1, 2). When
possible, secure the module also with chains.
• Do not tilt the drive module. It is heavy and its center of gravity is high. The module
overturns from a sideways tilt of 5 degrees. Do not leave the module unattended
on a sloping floor.
Maintenance 173