ABB ACS480, Hardware Manual, Page: 117 / 180

Markings
CE mark
Product complies with the applicable European Union legislation. For fulfilling the EMC requirements,
see the additional information concerning the drive EMC compliance (IEC/EN 61800-3).
TÜV Safety Approved mark (functional safety)
Product contains Safe Torque Off and possibly other (optional) safety functions which are certified
by TÜV according to the relevant functional safety standards. Applicable to drives and inverters;
not applicable to supply, brake or DC/DC converter units or modules.
UL listed mark for USA and Canada
Product has been tested and evaluated against the relevant North American standards by the Un-
derwriters Laboratories.
CSA certification mark for USA and Canada
Product has been tested and evaluated against the relevant North American standards by
the CSA Group.
RCM mark
Product complies with Australian and New Zealand requirements specific to EMC, telecommunica-
tions and electrical safety. For fulfilling the EMC requirements, see the additional information con-
cerning the drive EMC compliance (IEC/EN 61800-3).
EAC (Eurasian Conformity) mark
Product complies with the technical regulations of the Eurasian Customs Union. EAC mark is required
in Russia, Belarus and Kazakhstan.
Electronic Information Products (EIP) green mark
„
The product complies with the People’s Republic of China Electronic Industry Standard (SJ/T 11364-
2014). The product does not contain toxic and hazardous substances or elements above the max-
imum concentration values, and it is an environmentally-friendly product which can be recycled.
WEEE mark
At the end of life the product should enter the recycling system at an appropriate collection point
and not placed in the normal waste stream.
EMC compliance (IEC/EN 61800-3:2004 + A2012)
￭ Definitions
EMC stands for Electromagnetic Compatibility. It is the ability of electrical/electronic
equipment to operate without problems within an electromagnetic environment. Likewise,
the equipment must not disturb or interfere with any other product or system within its locality.
First environment includes establishments connected to a low-voltage network which supplies
buildings used for domestic purposes.
Second environment includes establishments connected to a network not supplying domestic
premises.
Technical data 117