ABB ACS380 Series, Hardware Manual

Page: 39 / 186

Hardware description 39
The user interface in brief:
• In the Home view, push the Back key to open the Options view.
• In the Home view, push the OK key to open the Menu .
• Navigate the views with the arrow keys.
• Push the
OK key to open the highlighted setting or item.
• Use the left and right arrow keys to highlight a value.
• Use the up and down keys to set a value.
• Push the
Back key to cancel a setting or return to the previous view.

Home view
The Home view shows the reading of one of three measured signals. Select the page
with the left and right arrow keys.
The status bar at the top of the Home view shows:
• The control location ( Loc for local control and Rem for remote control)
• The status icons
• The reference target value
From the Home view, push the Back key to open the Options view and push the OK
key to open the Menu .
Adjust the current reference value with the up and down arrow keys.
Status icons
The status icons show the operational status of the drive:
Icon Animation Description
None Local Start/Stop enabled
None Stopped
None Stopped, start inhibited
Blinks Stopped, start commanded but inhibited
Rotates Running at reference
Rotates Running but not at reference
Blinks Running at reference, but reference = 0
Blinks Drive fault
None Local reference setting enabled