Control panels 83
How to select the monitored signals
Step Action
Display
1.
You can select which signals are monitored in the
Output mode and how they are displayed with group
parameters. See page
for
detailed instructions on changing parameter values.
By default, the display shows three signals.
Signal 1:
for macros 3-wire, Alternate,
Motor potentiometer, Hand/Auto and PID control;
for macros ABB standard and
Signal 3:
.
To change the default signals, select up to three
signals from group
to be
shown.
Signal 1: Change the value of parameter
to the index of the signal
parameter in group
(= number of the parameter without the leading
zero), eg, 105 means parameter
Value 100 means that no signal is displayed.
Repeat for signals 2 (
) and 3
). For example, if
= 0
and
= 0, browsing is disabled and only the
signal specified by
appears in the display. If all
three parameters are set to 0, ie, no signals are
selected for monitoring, the panel displays text “n.A”.
2.
Specify the decimal point location, or use the decimal
point location and unit of the source signal (setting 9
[
]). Bar graphs are not available for basic
control panel. For details, see parameter
.
.
3.
Select the units to be displayed for the signals. This
has no effect if parameter
is set to 9
). For details, see parameter
.
LOC
PAR
SET
FWD
103
LOC
PAR
SET
FWD
104
LOC
PAR
SET
FWD
105
LOC
PAR
SET
FWD
9
LOC
PAR
SET
FWD
3
Summary of Contents for ACS355 series
