ABB ACS350 Series, User Manual

Page: 147 / 314

Actual signals and parameters
147
Bit 3 = Reserved
Bit 4 = START ENABLE 1 MISSING
Bit 5 = START ENABLE 2 MISSING
Bit 6 = EMERGENCY STOP
Bit 7 = ENCODER ERROR
Bit 8 = FIRST START
Bit 9 = INPUT PHASE LOSS
Bit 10...15 = Reserved
04 FAULT HISTORY Fault history (read-only)
0401 LAST FAULT Code of the latest fault. See chapter Fault tracing for the codes. 0 = Fault
history is clear (on panel display = NO RECORD).
1 = 1
0402 FAULT TIME 1 Day on which the latest fault occurred.
Format: Date if the real time clock is operating. / The number of days
elapsed after the power-on if the real time clock is not used, or was not
set. 1 = 1 days
0403 FAULT TIME 2 Time at which the latest fault occurred.
Format on the assistant panel: Real time (hh:mm:ss) if the real time clock
is operating. / Time elapsed after the power-on (hh:mm:ss minus the
whole days stated by signal
0402 FAULT TIME 1) if real time clock is not
used, or was not set.
Format on the basic panel: Time elapsed after power-on in 2 second ticks
(minus the whole days stated by signal
0402 FAULT TIME 1). 30 ticks =
60 seconds. E.g. Value 514 equals 17 minutes and 8 seconds (= 514/30).
0404 SPEED AT FLT Motor speed in rpm at the time the latest fault occurred 1 = 1 rpm
0405 FREQ AT FLT Frequency in Hz at the time the latest fault occurred 1 = 0.1 Hz
0406 VOLTAGE AT FLT Intemediate circuit voltage in VDC at the time the latest fault occurred 1 = 0.1 V
0407 CURRENT AT FLT Motor current in A at the time the latest fault occurred 1 = 0.1 A
0408 TORQUE AT FLT Motor torque in percent of the motor nominal torque at the time the latest
fault occurred 1 = 0.1%
0409 STATUS AT FLT Drive status in hexadecimal format at the time the latest fault occurred
0412 PREVIOUS FAULT 1 Fault code of the 2nd latest fault. See chapter Fault tracing for the codes. 1 = 1
0413 PREVIOUS FAULT 2 Fault code of the 3rd latest fault. See chapter Fault tracing for the codes. 1 = 1
0414 DI 1-5 AT FLT Status of digital inputs DI1…5 at the time the latest fault occurred (binary)
Actual signals
No. Name/Value Description FbEq