94 Control panels
Fault logger mode
In the Fault logger mode, you can:
• view the drive fault history of maximum ten faults (after a power off, only the three
latest faults are kept in the memory)
• see the details of the three latest faults (after a power off, the details of only the
most recent fault is kept in the memory)
• read the help text for the fault
• start, stop, change the direction and switch between local and remote control.
How to view faults
Step Action
Display
1.
Go to the Main menu by pressing
if you are in the
Output mode, otherwise by pressing repeatedly
until
you get to the Main menu.
2.
Go to the Fault logger mode by selecting FAULT
LOGGER on the menu with keys
and
, and
pressing
. The display shows the fault log starting
with the latest fault.
The number on the row is the fault code according to
which the causes and corrective actions are listed in
chapter
on page
3.
To see the details of a fault, select it with keys
and
, and press
.
4.
To show the help text, press
. Scroll the help text with
keys
and .
After reading the help, press
to return to the
previous display.
MENU
EXIT
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT
ENTER
00:00
LOC
MAIN MENU
1
ENTER
10:
19.03.05 13:04:57
6:
7:
EXIT
DETAIL
00:00
LOC
FAULT LOGGER
1
DETAIL
FAULT
10
FAULT TIME 1
13:04:57
FAULT TIME 2
EXIT
DIAG
00:00
LOC
PANEL LOSS
DIAG
OK
Check: comm lines
and connections,
parameter 3002,
parameters in groups
10 and 11.
EXIT
OK
00:00
LOC
DIAGNOSTICS
Aotewell Ltd
www.aotewell.com
Industry Automation
HongKong|UK|China
+86-755-8660-6182