ABB ACS280, Firmware Manual, Page: 236 / 430

236 Parameters
-200000.00…
200000.00 PID
customer units
Process PID internal setpoint. 1 = 1 PID
customer
unit
40.65 Trim auto connection
Enables the PID trim auto connection and connects
PID trim
40.05 Process PID trim output act
to either
speed, torque or frequency chains, based on the trim
selection parameter
40.52 Set 1 trim selection
.
See control chain diagram on page
426
.
Disable
Disable Disable PID trim auto connection. 0
Enable Enable PID trim auto connection. 1
40.79 Set 1 units
Selects the units used for Process PID setpoint,
feedback and deviation.
150
User text User editable text. User text default is “PID unit 1”. 0
% Percentage. 4
bar Bar. 74
kPa Kilopascal. 75
Pa Pascal, 77
psi Pound per square inch. 76
CFM Cubic feet per minute. 26
inH
2
O Inch of water. 58
°C Centigrade. 150
°F Fahrenheit. 151
mbar Millibar. 44
m
3
/h Cubic meters per hour. 78
dm
3
/h Cubic decimeters per hour. 21
l/s Liters per second. 79
l/min Liters per minute. 37
l/h Liters per hour. 38
m
3
/s Cubic meter per second. 88
m
3
/min Cubic meter per minute. 40
km
3
/h Cubic kilometers per hour. 131
gal/s Gallons per second. 47
ft
3
/s Cubic feet per second. 50
ft
3
/min Cubic feet per minute. 51
ft
3
/h Cubic feet per hour. 52
ppm Parts per million. 34
inHg Inch of mercury. 29
kCFM Thousands of cubic feet per hour. 126
inWC Inch water column. 65
gpm Gallons per minute. 80
gal/min Gallons per minute. 48
in wg Inch of water. 59
MPa Megapascal. 94
No. Name/Value Description Default
FbEq 16