ABB ACS2000 AFE 2MVA, User Manual

Page: 77 / 181

77 ACS2000 AFE 2MVA UM 3BHS355653 ZAB E01 REV. H
—
4.5 Storage
The drive can be stored for up to one year in the original packaging as
long as it is not damaged or opened. For information on longer
storage periods, contact the ABB service organization.
4.5.1 Storage conditions
The minimum requirements for storage are based
on IEC 60721-3-1
'Classification of environmental
conditions: Classification of groups of environ-
mental parameters and their severities; Storage'
.
—
Table 4-2
Storage conditions
4.5.2 Storage
If the drive is taken out of service for a longer time,
proceed as follows:
1. Cover all cable inlets and ventilation slots with
an impermeable plastic or aluminum foil and a
wooden panel.
2. Add a desiccant of the appropriate quality:
- 1 unit desiccant (30 g) absorbs 6 g water
vapor.
The following quantity is needed when using
a polyethylene foil:
- 10 units/m
2
foil
3. Close and lock the doors of the cabinet.
4. Use polyethylene or equivalent for packaging:
- 0,3g/m
2
/24h water vapor diffusion
5. Attach humidity indicators to the packaging.
The storage conditions and the packaging should
be checked regularly. Any damages that occur
during the storage period should be repaired
immediately.
1K22 Climatic conditions
Air temperature -25 – +55 °C (drive)
-5 – +55 °C (spare parts)
Relative humidity 10 – 100%
Absolute humidity 0.5 – 29%
1Z3 Special climatic conditions
Movement of
surrounding air 30 m/s
1B1 Biological conditions
Flora Negligible
Fauna Negligible
1M12 Mechanical conditions
Vibration
Acceleration
spectral density
0.1 m/s
2
(5 – 200 Hz)