ABB ACS180-04S-03A7-1, Hardware Manual, Page: 140 / 192

EAC (Eurasian Conformity) mark
Product complies with the technical regulations of the Eurasian Customs Union.
EAC mark is required in Russia, Belarus and Kazakhstan.
Electronic Information Products (EIP) symbol including an Environment Friendly
Use Period (EFUP).
Product is compliant with the People’s Republic of China Electronic Industry
Standard (SJ/T 11364-2014) about hazardous substances. The EFUP is 20 years.
China RoHS II Declaration of Conformity is available from
https://library.abb.com .
WEEE mark
At the end of life the product should enter the recycling system at an appropriate
collection point and not placed in the normal waste stream.
KC mark
Product complies with Korean Registration of Broadcasting and Communications
Equipment Clause 3, Article 58-2 of Radio Waves Act.
EMC compliance (IEC/EN 61800-3:2004 + A1:2012)
￭
Definitions
EMC stands for Electromagnetic Compatibility. It is the ability of
electrical/electronic equipment to operate without problems within an
electromagnetic environment. Likewise, the equipment must not disturb or
interfere with any other product or system within its locality.
First environment includes establishments connected to a low-voltage network
which supplies buildings used for domestic purposes.
Second environment includes establishments connected to a network not supplying
domestic premises.
Drive of category C1: drive of rated voltage less than 1000 V and intended for use
in the first environment.
Drive of category C2: drive of rated voltage less than 1000 V and intended to be
installed and started up only by a professional when used in the first environment.
Note: A professional is a person or organization having necessary skills in installing
and/or starting up power drive systems, including their EMC aspects.
Drive of category C3: drive of rated voltage less than 1000 V and intended for use
in the second environment and not intended for use in the first environment.
140 Technical data