TRANSPORTATION, STORAGE AND DISPOSAL
PRODUCT
ACS1000W
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS213400 E01
REV.
J
LANG.
en
PAGE
5.4. Lifting and transportation
It is recommended to have the following information, which is in
“Appendix C
-
mechanical drawings”, at hand before transporting the cabinet:
–
“Layout drawing” document
–
“Fixing and Lifting details” document
5.4.1. General notes on transportation
5.4.2. Using a crane
Use lifting equipment (eg, web slings, chain slings, round slings, safety hooks,
shackles) that corresponds to the weight of the cabinet.
5.4.2.1. Standard case
–
Attach a sling to the outer holes of the rails (arrows).
–
The rails can be removed after the cabinet has been installed at its final
location.
–
To attach a sling, use appropriate safety hooks or shackles.
NOTICE
Risk of component damage.
–
DO NOT lift and move the drive or a transport unit using a forklift. The
frame of the cabinets could be damaged. If a crane is not available,
contact ABB for instructions on other means of moving.
–
Transport the cabinet in upright position.
–
To ensure that dirt cannot enter, keep the doors closed. Metallic dust
in particular can cause damage and failure when the drive is energized
–
If the drive is delivered in several transport units, do not lift and move
the drive by crane after the transport units have been joined. Use
appropriate transport means eg, heavy load hydraulic rollers or air
cushions. If in doubt, contact ABB for instructions.