IMPORTANT SAFETY INFORMATION
PRODUCT
ACS1000W
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS213400 E01
REV.
J
LANG.
en
PAGE
2.3. Product safety labels
Safety labels are affixed to the drive components to alert personnel of potential
hazards when working on the equipment. For more information, see the label
placement document for the drive. The instructions on the safety labels must
always be followed and the labels must be kept in a perfectly legible condition.
Figure 2
-
1 Product warning label examples (label placement depends on the drive)
Additional safety labels, including the following, might also be provided:
1) Danger label
2) Warning label
3) Caution label
4) Notice label
Electricity warning
This sign can also have additional text below it, eg, “High voltage”.
Hot surface
Crushing of hands
No access for people with active implanted cardiac device
The magnetic field of the drive can influence the functioning of
pacemakers. The pacemaker sign should be installed at the entrance to
the drive room or at a minimum distance of 6 m from the drive to stop
personnel with pacemakers approaching the drive.
Firefighting sign
Outlines the procedure when fighting fire in electrical equipment. The
sign must be installed well visible near the drive.
High voltage sign
Must be installed clearly visible at the main circuit breaker in the
switchgear room. The sign alerts personnel to the high voltage which can
be present on the secondary side of the input transformer until the main
circuit breaker has been opened and secured and the drive has been de-
energized and grounded.
1
2
3
4
