ABOUT THIS MANUAL
PRODUCT
ACS1000W
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS213400 E01
REV.
J
LANG.
en
PAGE
17/166
1.5. Target groups and required qualification
The drive presented in this manual is part of an industrial environment where
voltages are present that contain a potential hazard of electric shock and / or burn.
For this reason, only personnel who have a thorough knowledge of the drive and
the industrial environment and have obtained the required qualification should
handle, install, operate, or maintain the drive.
The manual addresses personnel who are responsible for unpacking,
transportation, installation, operation and maintenance of the drive. The
personnel must carry out the below listed tasks in a manner that does not cause
physical harm or danger, and ensures the safe and reliable functioning of the drive.
Commissioning of the drive must only be performed by qualified and certified ABB
personnel.
1.5.1. Handling
The personnel must be skilled and experienced in unpacking and transporting
heavy equipment.
1.5.2. Mechanical installation
The personnel must be qualified to prepare the installation site according to the
site and equipment requirements and to perform the installation accordingly.
1.5.3. Electrical installation
The personnel must have a sound knowledge of the relevant electrical codes and
specifications covering low and medium voltage equipment, be experienced with
electrical wiring principles and know the electrical symbols typically used in wiring
diagrams.
1.5.4. Operation
The personnel include all persons who operate the drive from the local operator
panel of the drive. The personnel must know the functions of the operator panel,
be adequately trained for the drive, and know the driven process. Special
knowledge of frequency converter technology is not required.
Table 1
-
7 Encoder
Title
Document number
Installation and start
-
up guide for the pulse encoder
module NTAC
-
0x
3AFY58919730
