ABB ACS-AP-x User Manual Download

Page: 26 / 66

26 Basic operation



System information and help



Faults and warnings

See

Fault tracing

(page

)

for detailed information on faults and warnings.



Basic settings and assistants

Task

Actions

How to get help.

Press

to open the context-sensitive help.

To view drive information.

Go to

Menu > System info > Drive

To view control panel version.

Go to

Menu > System info > Control panel

To view application program license.

Go to

Menu > System info > Licenses

To view Product application information.

Go to

Menu > System info > Product

application

Task

Actions

Hide/view an active fault.

Faults are automatically displayed. If you hide a
fault by pressing

(

Hide

), it automatically

reappears after 60 seconds of no key presses.
You can also view the fault through

Options >

Active faults

Open help page on a fault.

Press

to view the help page.

Reset an active fault.

Press

(

Reset

) to reset an active fault.

View

tripping

faults.

Go to

Menu > Event log > Faults

Hide/view an active warning.

Warnings are automatically displayed. If you hide
a warning by pressing

(

Hide

), it

automatically reappears if the warning is still active
after 60 seconds of no key presses.

Open help page on a warning.

Press

(

How to fix

) or

to view the help

page.

Reset an active warning.

Warnings disappear automatically once the
condition that has triggered it goes away.

View past warnings and faults.

Go to

Menu > Event log > Other events

Task

Actions

Adjust backlight brightness.

Press

Adjust display contrast.

Press

Change language.

Go to

Menu > Settings > Language

Change time and date, and related
settings.

Go to

Menu > Settings > Date & time

Launch an assistant.

Go to

Menu > Assistants

and select an assistant

to launch.

Summary of Contents for ACS-AP-x


































































Search results

Summary of Contents for ACS-AP-x

Reviews:

Related manuals for ACS-AP-x

Brands by name

Popular brands

ABB ACS-AP-x, User Manual

Search results

Summary of Contents for ACS-AP-x

Reviews:

Related manuals for ACS-AP-x

Brands by name

Popular brands