ABB ACS-AP Series User Manual Download

Page: 24 / 60

24 Basic operation

Common user tasks

This following tables list common user tasks and describes how to complete them.
See

Functions in the main Menu

and

Functions in the Options menu

for detailed

descriptions of functions in the menus.



Basic operation of the drive



Parameters



System information and help

Task

Actions

Start and stop the drive.

In local control, press

to start the drive and

to stop the drive.

Set the reference (for example, speed) in
the

Home

view.

In local control, go to

Options > Reference

. Set

the reference with the arrow keys. For detailed
instructions, see

Setting the reference

on page

Switch between local and remote control. Press

Change the direction of motor rotation.

In local control, go to the

Home

view, press

(

Options

) to open the

Options

menu and select

Direction change

Task

Actions

Choose parameters displayed on the
Favorites list.

Go to

Menu > Parameters > Favorites > Edit

Summary of Contents for ACS-AP Series





























































Search results

Summary of Contents for ACS-AP Series

Reviews:

Related manuals for ACS-AP Series

Brands by name

Popular brands

ABB ACS-AP Series, User Manual

Search results

Summary of Contents for ACS-AP Series

Reviews:

Related manuals for ACS-AP Series

Brands by name

Popular brands