ABB ACS-AP-I, User Manual

Page: 37 / 82

•
Press ( Back ) to go back to the parameter view.
Editing the Home view functions are described in more detail in Editing the contents of the
Home view (page 54) .
￭
Editing parameters
You can edit parameter values with the arrow keys.
1.
Press ( Select ) to select the desired parameter from the list.
2.
Press ( Edit ).
3. Use and to change the value.
4.
Press ( Save ) to save the value, or press ( Cancel ) to exit the parameter view
and discard any changes.
5. Press + to restore the default value of the parameter (this does not save it).
See the sections below for more information on editing specific parameter types.
￭
Editing numeric parameters
Numeric parameters include parameters with linear numeric values, passcodes, time and
date parameters, durations and exception dates. For numeric parameters with linear values,
the minimum and maximum values are displayed in the bottom left and right corners of the
content area, respectively.
•
Use and to highlight digits
• Use and to change the value.
•
Press ( Save ) to save the value and exit the view.
•
To cancel and exit, press ( Cancel ).
￭
Editing selection list parameters
A selection list consists of mutually exclusive options, such as the language selection list.
Functions in the main Menu 37