manualshive.com logo in svg

ABB ACS 600 Series, Hardware Manual

Share
Download
ABB ACS 600 Series Hardware Manual Download Page 71

ACS/ACC/ACP 604/607 Drives

ACx=ACX/ACC/ACP

B-1

Appendix B – ACx 607 Dimensional Drawings

Drawings

The following pages contain dimension drawings, cable connection 
drawings and an assembly drawing. The dimension drawings show 
the ACS 607 outline and mounting dimensions and various 
enclosure details. The cable connection drawings show the 
locations of the input power and motor connection terminals and the 
recommended arrangement for routing the cables as they enter the 
enclosure. The assembly drawing shows the location of the optional 
X2 or 2TB control terminal block and the locations of various option 
modules.

Dimension Drawings

Refer to 

ACS 607 Enclosure Size and Style on page A-21 for 

information explaining how to determine the applicable drawings for 
a particular drive configuration.

The drawings show the location and dimensions of the IEC cable 
gland plates. NEMA style R7, R8 and R9 frame size drives have 
blank conduit plates installed over 8.9 x 12.6 inch rectangular 
openings at the top and bottom of the enclosures. NEMA style drives 
have 8 as the 20th character of the Type Code.

Connection Drawings

The applicable connection drawings are determined by drive frame 
size and cabling direction. Drive frame sizes are listed in the table 
Dimensions and Weights (ACx 607) on page A-22. Cabling direction 
is determined by the 21st character of the ACS 607 Type Code. 
Refer to the table 

ACx 604/607 Type Code on page 1-2.

IEC units have cable gland plates installed in the top and/or bottom 
of the enclosure according to the cabling direction specified by the 
Type Code. NEMA style R7, R8 and R9 frame size units have blank 
conduit plates installed over 8.9 x 12.6 inch rectangular openings at 
the top and bottom regardless of the cabling direction specified.

Both IEC and NEMA style units have variations in terminal location 
and orientation according to the cabling direction specified.

It is generally feasible to change the cabling direction in the field or 
to install cabling in the direction opposite to the configured direction.

The following drawing package is effective from 10/5/1998.

Summary of Contents for ACS 600 Series



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands