Chapter 8 – Parameters
8-10
ACA 635 IGBT Supply Sections
14 Digital Outputs
Code Parameter
T
y
p
e
Default
Range
Description
Integer
Scaling
14
DIGITAL
OUTPUTS
14.04
DO2
GROUP+INDEX
801
-199999...+199999
This parameter selects the signal that controls
digital output D02 by the bit specified with Par.
14.05 DO2 BIT NUMBER.
Example: When bit number 0 (RDY_ON) of
Par 8.01 MAIN STATUS WORD is selected to
digital output D02, the value of Par. 14.04 is
set to 801, where 8 indicates the group and 01
the index of the selected signal. The bit
number is specified with Par. 14.05 DO2 BIT
NUMBER.
Note
: Invertation of the output is set with a
minus sign of the Par. 14.04 value.
1 = 1
14.05
DO2 BIT
NUMBER
0
0...15
This parameter specifies the bit number of the
signal selected with Par. 14.04 DO2 GROUP+
INDEX. See the example above.
1 = 1
Summary of Contents for ACS 600 MultiDrive
