ABB ACQ810, Firmware Manual

Page: 37 / 376

The ACQ810 control panel 37
„
Time & Date
In the Time & Date option, you can:
• show or hide the clock
• change date and time display formats
• set the date and time
• enable or disable automatic clock transitions according to the daylight saving
changes
• start, stop, change the direction and switch between local and remote control.
The Control Panel contains a battery to ensure the function of the clock when the
panel is not powered by the drive.
How to show or hide the clock, change display formats, set the date and time
and enable or disable clock transitions due to daylight saving changes
Step Action Display
1. Go to the Main menu by pressing if you are in the
Output mode.
Otherwise press
repeatedly until you get to the
Main menu.
2. Go to the Time & Date option by selecting TIME & DATE
on the menu with keys
and , and pressing
.
3. To show (hide) the clock, select CLOCK VISIBILITY on
the menu, press
, select Show clock (Hide clock)
with keys and and
press , or, if you want to return to the previous
display without making changes, press .
To specify the time format, select TIME FORMAT on the
menu, press
and select a suitable format with keys
and . Press to save or to
cancel your changes.
MENU
EXIT
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT ENTER 00:00
MAIN MENU 1 LOC
ENTER
CLOCK VISIBILITY
TIME FORMAT
DATE FORMAT
SET TIME
SET DATE
EXIT SEL 00:00
TIME & DATE 1 LOC
SEL
SEL
EXIT
Show clock
Hide clock
EXIT SEL 00:00
CLOCK VISIB 1
LOC
SEL
SEL CANCEL
24-hour
12-hour
CANCEL SEL 00:00
TIME FORMAT 1 LOC