ABB ACQ80, Firmware Manual

Page: 12 / 390

12 Introduction to the manual
Target audience
The reader is expected to know the fundamentals of electricity, wiring, electrical
components, electrical schematic symbols, and basic working principles of
solar PV and pump.
The manual is written for readers worldwide. Both SI and imperial units are
shown.
Purpose of the manual
This manual provides information needed for designing, commissioning, or
operating the solar pump drive system.
Contents of this manual
The manual consists of the following chapters:
•
Introduction to the manual
(this chapter, page
11
) describes applicability,
target audience, purpose and contents of this manual. At the end, it lists
terms and abbreviations.
•
Startup, control with I/O and ID run
(page
17
) describes how to start up the
drive as well as how to start, stop, change the direction of the motor
rotation and adjust the motor speed through the I/O interface.
•
Using the control panel
(page
33
) contains instructions for removing and
reinstalling the assistant control panel and briefly describes its display, keys
and key shortcuts.
•
Program features
(page
35
) describes program features with lists of related
user settings, actual signals, and fault and warning messages.
•
Control macros
(page
75
) contains a short description of each macro
together with a connection diagram. Macros are pre-defined applications
which will save the user time when configuring the drive.
•
Parameters
(page
79
) describes the parameters used to program the drive.
•
Additional parameter data
(page
273
) contains further information on the
parameters.
•
Fault tracing
(page
303
) lists the warning and fault messages with possible
causes and remedies.
•
Fieldbus control through the embedded fieldbus interface (EFB)
(page
341
)
describes the communication to and from a fieldbus network using the
embedded fieldbus interface of the drive.