ABB ACQ580-07, Hardware Manual

Page: 213 / 324

Noise Heat dissipa-
tion
Air flow ACQ580-
07…
IP54 (UL Type 12) IP21, IP42 (UL Type 1)
dB(A) W cfm m3/h cfm m3/h
68 5868 765 1300 824 1400 0363A-4
68 7600 765 1300 824 1400 0430A-4
72 8353 1118 1900 1118 1900 0505A-4
72 9471 1118 1900 1118 1900 0585A-4
72 11200 1118 1900 1118 1900 0650A-4
72 11386 1413 2400 1413 2400 0725A-4
72 13725 1413 2400 1413 2400 0820A-4
71 15300 1542 2620 1542 2620 0880A-4
U
n = 480 V - NEC types
67 2487 344 585 403 685 0124A-4
67 2497 353 600 412 700 0156A-4
67 3314 353 600 412 700 0180A-4
65 3806 412 700 470 800 0240A-4
65 4942 412 700 470 800 0260A-4
68 5868 765 1300 824 1400 0361A-4
68 7600 765 1300 824 1400 0414A-4
72 8353 1118 1900 1118 1900 0505A-4
72 9471 1118 1900 1118 1900 0585A-4
72 11200 1118 1900 1118 1900 0650A-4
72 11386 1413 2400 1413 2400 0725A-4
72 13725 1413 2400 1413 2400 0820A-4
71 15300 1542 2620 1542 2620 0880A-4
Terminal and entry data for the power cables
There are two (in frames R6 to R9) or four (in frames R10 and R11) 60 mm (2.36 in)
diameter holes in the entry plate for the input power cables and two (in frames R6 to
R9) or four (in frames R10 and R11) 60 mm (2.36 in) diameter holes for the motor cables.
￭
IEC – Standard configuration
Input and motor cable terminal bolt sizes, accepted wire sizes (per three phases) and
tightening torques are given below.
Technical data 209