ABB ACQ550-x1-06A6-2, User Manual

Page: 57 / 314

ACQ550-U1 User’s Manual 57
Application macros
Application macros
Macros change a group of parameters to new, predefined values. Use macros to
minimize the need for manual editing of parameters. Selecting a macro sets all other
parameters to their default values, except:
• Group 99: START-UP DATA parameters (except parameter 9904 )
• 1602
PARAMETER LOCK
• 1607
PARAM SAVE
• 3018
COMM FAULT FUNC
and 3019
COMM FAULT TIME
• 9802
COMM PROT SEL
• Group 53: EFB PROTOCOL parameters
• Group 29: MAINTENANCE TRIG parameters.
After selecting a macro, you can make additional parameter changes manually with
the control panel.
You enable application macros by setting the value for parameter 9902
APPLIC
MACRO
. By default, 6,
PID CONTROL
, is the enabled macro.
The following sections describe each of the application macros and provide a
connection example for each macro.
The last section in this chapter, Macro default values for parameters , lists the
parameters that the macros change and the default values established by each
macro.