ABB ACQ550-U1-011A-6, User Manual

Page: 49 / 314

ACQ550-U1 User’s Manual 49
Control panel
Fault History Mode
Use the Fault History Mode to see drive fault history, fault state details and help for
the faults.
1. Select FAULT HISTORY in the Main Menu.
2. Press ENTER to see the latest faults (up to 10 faults, maximum).
3. Press DETAIL to see details for the selected fault.
• Details are available for the three latest faults.
4. Press DIAG to see the help description for the fault. See Diagnostics section.
Note: If a power off occurs, only the three latest faults will remain (with details only in
the first fault).
Drive Parameter Backup Mode
Use the Drive Parameter Backup Mode to export parameters from one drive to
another. The parameters are uploaded from a drive to the control panel and
downloaded from the control panel to another drive. Two options are available:
Par Backup Mode
The ACQ Control Panel can store a full set of drive parameters.
The Par Backup Mode has these functions:
• Upload to Panel – Copies all parameters from the drive to the Control Panel.
This includes user sets of parameters (if defined) and internal parameters such as
those created by the Motor Id Run. The Control Panel memory is non-volatile and
does not depend on the panel’s battery. To upload parameters to control panel,
follow these steps:
1
Select MENU to enter the main
menu.
2
Select PAR BACKUP with the UP/
DOWN buttons and select ENTER.
3
Scroll to Upload to Panel and select
SEL.
4
The text “Copying parameters” and a
progress diagram is displayed.
Select ABORT if you want to stop
the process.