ABB ACL30, User Manual

Page: 120 / 360

120 Using the control panel
I/O Settings
In the I/O Settings mode, you can:
• check the parameter settings related to any I/O terminal
• edit the parameter setting
• start, stop, change the direction and switch between local and remote control.

Editing parameter settings of I/O terminals
Step Action Display
1. Go to the Main menu by pressing if you are
in the Output mode, otherwise by pressing
repeatedly until you get to the Main menu.
2. Go the I/O Settings mode by selecting I/O
SETTINGS on the menu with keys
and
, and pressing .
Select the I/O group, e.g. Digital inputs, with keys
and .
3. Press . After a brief pause, the display shows
the current settings for the selection.
You can scroll digital inputs and parameters with
keys
and .
4. Press . The panel shows information related
to I/O selected (in this case, DI1).
You can scroll information with keys
and
.
Press to return to the digital inputs.
MENU
EXIT
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT ENTER 00:00
MAIN MENU 1 LOC
ENTER
Analog outputs
Analog inputs
Digital I/Os
Digital inputs
Relay outputs
EXIT SEL 00:00
I/O SETTINGS 1
LOC
Analog outputs
Analog inputs
Digital I/Os
Digital inputs
Relay outputs
EXIT SEL 00:00
I/O SETTINGS 4 LOC
SEL
DI1
1002 UP COMMAND
DI2
DI3
I/O SETTINGS 1 LOC
EXIT INFO 00:00
INFO
EXIT
LOC
EXIT 00:00
LOC
NUM OF I/O ITEMS
0
SLOT NUMBER
0
NODE NUMBER
I/O INFO