ABB ACH580-01 Series, Hardware Manual, Page: 49 / 396

Operation principle and hardware description 49
Type designation key
The type designation contains information on the specifications and configuration of
the drive. You find the type designation on the type designation label attached to the
drive. The first digits from the left express the basic configuration, for example,
ACH580-01-12A7-4. The optional selections are given after that, separated by plus
signs, for example, +L501. The main selections are described below. Not all
selections are available for all types.
CODE DESCRIPTION
Basic codes
ACH580 Product series
01 When no options are selected: Wall mounted, IP21 (UL Type 1), control
panel with a USB port, choke, EMC C2 filter (internal EMC filter), safe torque
off, coated boards, cable lead through entry from the bottom, cable box or
the conduit plate with cable entries, quick installation and start-up guide
(multilingual).
Size
xxxx Refer to the rating table, page 244
Voltage rating
4 2 = 200…240 V
4 = 380…480 V
6 = 575…600 V
See page
286 for further information.
Option codes (plus codes)
Control panel and panel options
J400 ACH-AP-H Hand-Off-Auto control panel (as standard)
J424 CDUM-01 Blank control panel cover (no control panel)
J429 ACH-AP-W Hand-Off-Auto control panel with a Bluetooth interface
I/O (one slot available for I/O options)
L501 CMOD-01 External 24 V AC/DC and digital I/O extension (2×RO and 1×DO)
L512 CHDI-01 115/230 V Digital input extension (6×DI and 2×RO)
L523 CMOD-02 External 24 V AC/DC and isolated PTC interface
L537 CPTC-02 ATEX certified PTC interface and external 24 V. Requires option
Q971. Europe only.
Safety
Q971 ATEX certified safe disconnection function, EX II (2) GD. Available only with
option L357. Europe only.
ACH580-01-206A-4+B056+J400+...
1 2 3 4
1
2
3
4