manualshive.com logo in svg

ABB ACH550-01, User Manual

Share
Download
ABB ACH550-01 User Manual Download Page 132

120

Real-time clock and timed functions

ACH550 User's Manual

1. Enabling the timer

The timer can be enabled from one of the digital inputs or 
inverted digital inputs.
To enable the timer, follow these steps:

1

Press MENU to go to the 

main menu.

2

Select the PARAMETERS 

mode with the UP/DOWN 

keys. Then press ENTER 

to go to the Parameters 

mode.

3

Scroll to group 36 TIMED 

FUNCTIONS with the UP/

DOWN keys and press 

SEL.

4

Scroll to TIMERS ENABLE 

with the UP/DOWN keys 

and press EDIT.

5

The current value is 

displayed. Use the UP/

DOWN keys to change the 

value.

6

After selecting the new 

value, press SAVE to save 

the value.

7

The new value is displayed 

below the TIMERS 

ENABLE text. Press EXIT 

twice to return to the main 

menu.

Summary of Contents for ACH550-01







































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands