ABB ACH480, Hardware Manual

Page: 211 / 214

Def /
FbEq16/32 Description Name/Value No.
10 = 1 s Activation delay for RO5. 0.0 … 3000.0 s
0.0 s Defines the deactivation delay for relay output RO5. RO5 OFF delay 15.12
10 = 1 s Deactivation delay for RO5. 0.0 … 3000.0 s
Not
energized Selects a drive signal to be connected to relay output
RO6. RO6 source 15.13
0 Output is not energized. Not energized
1 Output is energized. Energized
… For the complete parameter list, refer to the drive firmware manual.
0.0 s Defines the activation delay for relay output RO6. RO6 ON delay 15.14
10 = 1 s Activation delay for RO6. 0.0 … 3000.0 s
0.0 s Defines the deactivation delay for relay output RO6. RO6 OFF delay 15.15
10 = 1 s Deactivation delay for RO6. 0.0 … 3000.0 s
Not
energized Selects a drive signal to be connected to relay output
RO7. RO7 source 15.16
0 Output is not energized. Not energized
1 Output is energized. Energized
… For the complete parameter list, refer to the drive firmware manual.
0.0 s Sets the activation delay for relay output 7. RO7 ON delay 15.17
10 = 1 s Activation delay for relay output 7. 0.0…3000.0 s
0.0 s Sets the deactivation delay for relay output 7. RO7 OFF delay 15.18
10 = 1 s Deactivation delay for relay output 7. 0.0…3000.0 s
Technical data
External connectors: Four 3-pin (1×3) spring-clamp type terminal blocks, tin plated,
2.5 mm
2
(14 AWG) wire size, pitch 5.0 mm.
Internal connectors: Connector X102 provides relay control signals from the control
board: 1×8 pin header, pitch 2.54 mm, height 33.53 mm. Connector X100 is not in use
in BREL-01: 2×4 pin header, pitch 2.54 mm, height 15.75 mm.
BREL-01 relay output extension module 211