ABB AC500 Series Installation Instructions Manual Download

Page: 253 / 262

33.6 Cleaning

Cleaning instruction
Do not use cleaning agent for cleaning the device.

Use a damp cloth instead.

33.7 Recycling

Disposal and recycling information
This symbol on the product (and on its packaging) is in accordance with the

European Union's Waste Electrical and Electronic Equipment (WEEE) Directive.

The symbol indicates that this product must be recycled/disposed of separately

from other household waste.

It is the end user’s responsibility to dispose of this product by taking it to a

designated WEEE collection facility for the proper collection and recycling of the

waste equipment.

The separate collection and recycling of waste equipment will help to conserve

natural resources and protect human health and the environment.

For more information about recycling, please contact your local environmental

office, an electrical/electronic waste disposal company or the store where you

purchased the product.

TU582-S

Recycling

2019/11/15

3ADR024117M02xx, 11, en_US

253

Summary of Contents for AC500 Series







































































































































































































































































Search results

Summary of Contents for AC500 Series

Reviews:

Related manuals for AC500 Series

Brands by name

Popular brands

ABB AC500 Series, Installation Instructions Manual

Search results

Summary of Contents for AC500 Series

Reviews:

Related manuals for AC500 Series

Brands by name

Popular brands