ABB AC500-S Safety User Manual Download Page 58

Page: 58 / 452

3.1.8 Ordering data

Type

Description

Order code

SM560-S

Safety module – CPU

1SAP 280 000 R0001

SM560-S-XC

Safety module – CPU, Extreme Con-

ditions

1SAP 380 000 R0001

3.2 Generic Safety I/O module behaviour

3.2.1 Overview

All Safety I/O modules (AI581-S, DI581-S and DX581-S) can be used in a centralized or remote configura-

tion with PROFINET / PROFIsafe (see Figure 2.3). PROFINET devices CI501, CI502, CI504 and CI506

(Release date: 2013 and newer) can be used to attach Safety I/O modules in remote configurations. Safety

I/O modules can be freely mixed with any Non-safety I/Os from AC500 and AC500 eCo product families.

NOTICE!

Safety I/O module firmware update can be currently performed only by the qualified personnel in the

ABB factory.

AC500-S Safety Modules

Generic Safety I/O module behaviour > Overview

30.03.2017

AC500-S

Summary of Contents for AC500-S





































































































































































































































































































































































































































































Search results

Summary of Contents for AC500-S

Reviews:

Brands by name

Popular brands

ABB AC500-S, Safety User Manual

Search results

Summary of Contents for AC500-S

Reviews:

Brands by name

Popular brands