ATTENTION
The sensor should be installed by technically qualified
personnel. Failure to install the sensor in compliance with
applicable codes and regulations and according to the
manufacturer’s recommendations may result in electrical
shock, fire hazard, unsatisfactory performance or equipment
failure, and may void the sensor warranty.
WARNING
Only qualified individuals who are familiar with appropriate
national codes, local codes and sound practices should
install, repair or modify electric motors and/or related
accessories. Installation should conform to appropriate codes
and practices. Failure to follow these instructions could result
in serious personal injury, death and/or property damage.
WARNING
Electrical Live Circuit Hazard. Do not touch electrically live
parts or equipment. Disconnect, lock out and tag out the motor’s
power supply before installing or servicing the sensor.
CAUTION
Motor Surface Temperature Hazard. The external surface
of an electric motor may reach temperatures which can cause
discomfort, burns or injury to individuals who come into
contact with the hot surface. For safety reasons the motor
should be switched off and allowed to cool before attempting to
install the sensor. Motor surface temperatures should only be
measured with suitable instruments and not estimated by hand
touch or direct skin contact. Failure to observe this precaution
could result in bodily injury.
CAUTION
Do not replace batteries!
I
ncorrect use of batteries may void the
certifications of the Smart Sensor, such as hazardous area
certifications, safety certifications, and IP rating. Dispose of
used sensors according to instructions.
This instruction sheet provides information on
the installation of ABB Ability™ Smart Sensor
with clamping bracket. Read these instructions
in their entirety before attempting installation.
—
INSTALL ATION GUIDE
ABB Ability™ Smart Sensor
Sequence for setup
Step 1 Install the Ability™ Smart Sensor Platform App
•
The Smart Sensor Platform App can be found in:
Apple – App Store, Android – Google Play Store
Note:
In some countries these stores may not be accessible. For
more information see www.abb.com/smartsensor.
Step 2
Register in the Ability™ Smart Sensor Platform App
•
Follow the sign up link
•
Alternatively, sign up on the web portal at
https://smartsensor.abb.com
•
Skip this step if you are already registered.
Step 3 Log in to ABB Ability™ Smart Sensor Platform App
•
Follow the instructions on the screen.
Step 4 Activate the Ability™ Smart Sensor with the
ABB Ability™ Smart Sensor Platform App
•
Follow the instructions on the screen.
Step 5 Install ABB Ability™ Smart Sensor
•
Verify that you have the right components and install the
sensor according to the instructions on page 3.
•
Follow the safety instructions carefully.
Step 6 Add the motor in the ABB Ability™ Smart Sensor
Platform App
Step 7 Take first measurements and check the motor condition
Step 8 For more detailed instructions
•
Visit
www.abb.com/smartsensor